Chuyên cung cấp,lắp đặt máy ép bùn,môi trường,xử lý môi trường - chuyen cung caplap dat may ep bunmoi truongxu ly moi truong

Chuyên cung cấp,lắp đặt máy ép bùn,môi trường

Thông tin rao vặt

Ngày Đăng	: 07/10/2013
Lượt xem	: 26
Khu vực	: Toàn quốc
Loạt tin	: Bán
Phản hồi	: 0

Thông tin liên hệ

Tên giao dịch	: truonglam99
Địa chỉ	: B40 Khu Kim Sơn, P Tân Phong ,Q7, HCM
Điện thoại	: 0949171545

Trần Trường Lâm Phone : 0949.171.545 Mail:

Yuan Chang Tsay Industry Co., Ltd:
Waste Water Treatment Environment Protection Equipments

Website: www.ycicl.com/

Yuan Chang Tsay Industry Co., Ltd

Environment Protection Equipments Manufacturer

Belt Presses:

Single/Double Belt Presses Type TD1 Series (suitable for high consistency)

Model		TD1-500K	TD1-500	TD1-750	Remark
Type		Single Belt	Single Belt	Single Belt
Belt Width (mm)		500	500	750
Treating Capacity (m3/hr) Inlet Consistency (S.S 1.5~2.5%)		0.1~0.5	0.1~0.7	0.3~1.1	(depends on the slurry feature)
D.S. (kg/hr)		1.5~8	1.5~11	4.5~17	(depends on the slurry feature)
Water Content's Rate (%)		77~85	77~85	77~85	(depends on the slurry feature)
Power Consumption(HP)	Driving Motor(Fixed Speed)	1/4	1/2	1/2
Power Consumption(HP)	Disposal Agitator Motor	1/4	1/4	1/4
Lower Collecting Tray for Pressed Filtrate		Yes	Yes	Yes
External Dimensions (Reference)(mm)	L	1680	1830	1830	Pls ask for the actual Dimension before ordering
	W	950	1050	1300
	H	1300	1650	1650
Base Dimension L1 x W1 (mm)		880 x 750	1110 x 850	1110 x 1100
Reference Weight (kgs)		280	430	520

Single/Double Belt Presses Type TD2 Series (suitable for high consistency)

Model		TD2-500	TD2-750	TD2-1000	Remark
Type		Double Belt	Double Belt	Double Belt
Belt Width (mm)		500	750	1000
Treating Capacity (m3/hr) Inlet Consistency (S.S 1.5~2.5%)		0.2~1.4	0.5~2.0	0.8~2.8	(depends on the slurry feature)
D.S. (kg/hr)		3.0~21	7.5~30	12~42	(depends on the slurry feature)
Water Content's Rate (%)		75~85	75~85	75~85	(depends on the slurry feature)
Power Consumption(HP)	Driving Motor(Fixed Speed)	1/2	1/2	1/2
Power Consumption(HP)	Disposal Agitator Motor	1/4	1/4	1/4
Lower Collecting Tray for Pressed Filtrate		Yes	Yes	Yes
External Dimensions (Reference)(mm)	L	1830	1830	1900	Pls ask for the actual Dimension before ordering
	W	1050	1300	1550
	H	1900	1900	1900
Base Dimension L1 x W1 (mm)		1110 x 850	1110 x 1110	1110 x 1350
Reference Weight (kgs)		490	600	730

Rotary drum Thickening + Double Belt Presses Type TA Series.

Model		TA-500	TA-750	TA-1000	TA-1250	Remark
Belt Width (mm)		500	750	1000	1250
Treating Capacity (m3/hr) Inlet Consistency (S.S 1.5~2.5%)		2.0 ~ 3.6	3.0 ~ 5.5	4.0 ~ 7.7	5.5 ~ 10.5	(depends on the slurry feature)
D.S. (kg/hr)		30 ~ 54	45 ~ 83	60 ~ 116	83 ~ 158	(depends on the slurry feature)
Water Content's Rate (%)		66 ~ 85	66 ~ 85	66 ~ 85	66 ~ 85	(depends on the slurry feature)
Power Consumption(HP)	Driving Motor (Speed Variable)	1/2	1/2	1/2	1/2
	Disposal Agitator Motor	1/4	1/4	1/4	1/2
	Drum Thickener	1/4	1/4	1/4	1/4
Lower Collecting Tray for Pressed Filtrate		Yes	Yes	Yes	Yes
External Dimensions (Reference)(mm)	L	2150	2250	2400	2400	Pls ask for the actual Dimension before ordering
	W	1050	1300	1550	1800
	H	2400	2400	2500	2600
Base Dimension L1 x W1 (mm)		1460 x 854	1460 x 1104	1460 x 1354	1460 x 1604
Reference Weight (kgs)		660	800	960	1220

Model		TA-1500	TA-1500L	TA-2000	Remark
Belt Width (mm)		1500	1500	2000
Treating Capacity (m3/hr) Inlet Consistency (S.S 1.5~2.5%)		7.0 ~ 12.5	9.5 ~ 17	13.5 ~ 24.5	(depends on the slurry feature)
D.S. (kg/hr)		105 ~ 188	143 ~ 255	203 ~ 368	(depends on the slurry feature)
Water Content's Rate (%)		66 ~ 85	66 ~ 85	66 ~ 85	(depends on the slurry feature)
Power Consumption(HP)	Driving Motor (Speed Variable)	1/2	1/2	3/4
	Disposal Agitator Motor	1/2	3/4	3/4
	Drum Thickener	1/2	1/2	3/4
Lower Collecting Tray for Pressed Filtrate		Yes	Yes	None
External Dimensions (Reference)(mm)	L	2750	2860	3000	Pls ask for the actual Dimension before ordering
	W	2050	2130	2630
	H	2700	2750	2650
Base Dimension L1 x W1 (mm)		1460 x 1854	2110 x 1860	2110 x 2400
Reference Weight (kgs)		1490	1800	2200

Gravity Belt Thickening + triple Belt Type TE3 Series (Suitable for Low/ Middle consistency)

Model		TE3-750	TE3-1000	TE3-1250	TE3-1500	TE3-2000	Remark
Belt Width (mm)		750	1000	1250	1500	2000
Low Consistency	Treating Capacity (m³/hr) Inlet Consistency(S.S. 0.4 ~ 0.8%)	15 ~ 20	19 ~ 25	26 ~ 35	38 ~ 50	50 ~ 65	(depends on the slurry feature)
Low Consistency	D.S. (kg/hr)	60 ~ 120	76 ~ 150	104 ~ 210	152 ~ 300	200 ~ 390	(depends on the slurry feature)
Middle Consistency	Treating Capacity (m³/hr) Inlet Consistency(S.S. 0.8 ~ 1.5%)	12 ~ 15	15.5 ~ 19	20.5 ~ 26	30.5 ~ 38	41 ~ 50	(depends on the slurry feature)
Middle Consistency	D.S. (kg/hr)	96 ~ 180	124 ~ 233	164 ~ 308	244 ~ 458	328 ~ 615	(depends on the slurry feature)
Water Content's Rate (%)		62 ~85	62 ~85	62 ~85	62 ~85	62 ~85	(depends on the slurry feature)
Power Consumption(HP)	Driving Motor (Speed Variable)	1/2	1/2	1/2	1	1
	Disposal Agitator Motor	1/4	1/4	1/2	3/4	3/4
	Drum Thickener	1/2	1/2	1/2	3/4	3/4
Lower Collecting Tray for Pressed Filtrate		None	None	None	None	None
External Dimensions (Reference)(mm)	L	4750	4800	4900	5800	5900	Pls ask for the actual Dimension before ordering
	W	1500	1700	1950	2250	2800	Pls ask for the actual Dimension before ordering
	H	2800	2800	2900	3100	3100
Base Dimension L1×H1 (mm)		4000 x 2400	4000 x 2400	4000 x 2400	4750 x 2500	4750 x 2500
Base Dimension L2×W1 (mm)		2578 x 1160	2578 x 1410	2578 x 1660	3350 x 1940	3350 x 2440
Reference Weight (kgs)		1500	1750	2050	2800	3350

Model		TE3-2500	TE3-2000L	TE3-2500L	TE3-3000	Remark
Belt Width (mm)		2500	2000	2500	3000
Low Consistency	Treating Capacity (m³/hr) Inlet Consistency(S.S. 0.4 ~ 0.8%)	65 ~ 85	60 ~ 80	75 ~ 100	95 ~ 125	(depends on the slurry feature)
Low Consistency	D.S. (kg/hr)	260 ~ 510	240 ~ 480	300 ~ 600	380 ~ 750	(depends on the slurry feature)
Low Consistency	Treating Capacity (m³/hr) Inlet Consistency(S.S. 0.8 ~ 1.5%)	54 ~ 65	50 ~ 60	64 ~ 75	80 ~ 95	(depends on the slurry feature)
Low Consistency	D.S. (kg/hr)	432 ~ 810	400 ~ 750	512 ~ 960	640 ~ 1200	(depends on the slurry feature)
Water Content's Rate (%)		62 ~ 85	62 ~ 85	62 ~ 85	62 ~ 85	(depends on the slurry feature)
Power Consumption(HP)	Driving Motor (Speed Variable)	2	2	3	3
	Disposal Agitator Motor	3/4	3/4	3/4	3/4
	Drum Thickener	1	1	1	2
Lower Collecting Tray for Pressed Filtrate		None	None	None	None
External Dimensions (Reference)(mm)	L	6300	7000	7450	7450	Pls ask for the actual Dimension before ordering
	W	3350	3000	3350	3850	Pls ask for the actual Dimension before ordering
	H	3350	3500	3650	3700
Base Dimension L1×H1 (mm)		5150 x 2650	5900 x 2900	6100 x 3100	6100 x 3100
Base Dimension L2×W1 (mm)		3350 x 2940	4065 x 2440	4065 x 2940	4065 x 3440
Reference Weight (kgs)		4100	4300	4700	5600

Filter Presses:

TC0 Type Series Manual Filter Press

Model	Filter Plate Size (mm/ PC )	Filter Area (M²)	Treating Ability (Sludge-cake capacity) (L / Lot )	Ref.Machine size (Naked Type) L x W x H (mm) Ref.Weight	Ref.Weight (kgs)
TC0-30-5	300 x 5	0.5	4	1230 × 780 × 1330	270
TC0-30-10	300 x 10	1.2	10	1430 × 780 × 1330	300
TC0-30-15	300 x 15	1.8	15	1630 × 780 × 1330	320
TC0-30-20	300 x 20	2.5	21	1830 × 780 × 1330	350
TC0-47-10	470 x 10	3.2	36	1630 × 890 × 1480	610
TC0-47-15	470 x 15	4.9	56	1880 × 890 × 1480	670
TC0-47-20	470 x 20	6.7	76	2130 × 890 × 1480	730
TC0-47-30	470 x 30	10.2	116	2630 × 890 × 1480	840

Remark :
1. Available for Naked Type / Hopper Type /Container with Trolley Type....etc. application choice.
2. Filter plate material : P.P. Engineering Plastics.
3. Our Company will reserve the right of the above design modification and accept customer ' s specific specifications order-made.

TC1 Type Series Semi-Auto Filter Press

Model	Filter Plate Size (mm/ PC )	Filter Area (M²)	Treating Ability (Sludge-cake capacity) (L / Lot )	Ref.Machine size (Naked Type) L x W x H (mm) Ref.Weight	Ref.Weight (kgs)
TC1-30-10	300 x 10	1.2	10	1630 × 760 × 1370	440
TC1-30-15	300 x 15	1.8	15	1830 × 760 × 1370	460
TC1-30-20	300 x 20	2.5	21	2030 × 760 × 1370	490
TC1-47-10	470 x 10	3.2	36	2020 × 890 × 1480	750
TC1-47-15	470 x 15	4.9	56	2270 × 890 × 1480	830
TC1-47-20	470 x 20	6.7	76	2520 × 890 × 1480	880
TC1-47-30	470 x 30	10.2	116	3020 × 890 × 1480	1010
TC1-47-40	470 x 40	13.7	156	3540 × 890 × 1480	1130
TC1-63-15	630 x 15	9.4	111	2300 × 1190 × 1750	1320
TC1-63-20	630 x 20	12.7	150	2550 × 1190 × 1750	1460
TC1-63-30	630 x 30	19.4	229	3050 × 1190 × 1750	1640
TC1-63-40	630 x 40	26.1	308	3570 × 1190 × 1750	1830
TC1-63-50	630 x 50	32.8	387	4070 × 1190 × 1750	2030
TC1-80-20	800 x 20	20.3	285	3110 × 1460 × 2130	2440
TC1-80-30	800 x 30	31.0	435	3710 × 1460 × 2130	2780
TC1-80-40	800 x 40	41.7	585	4330 × 1460 × 2130	3130
TC1-80-50	800 x 50	52.4	735	4930 × 1460 × 2130	3470
TC1-80-60	800 x 60	63.1	885	5550 × 1460 × 2130	3800
TC1-100-30	100 x 30	49.0	702	3800 × 1740 × 2260	4310
TC1-100-40	100 x 40	65.9	944	4420 × 1740 × 2260	4820
TC1-100-50	100 x 50	82.8	1186	5020 × 1740 × 2260	5350
TC1-100-60	100 x 60	99.7	1428	5640 × 1740 × 2260	5880

Remark :
1. Available for Naked Type / Hopper Type / Container with Trolley Type..... etc. application choice.
2. Filter plate material: P.P. Engineering Plastics.
3. Our Company will reserve the right of the above design modification and accept customer ' s specific specifications order-made.

TC2 Semi - Auto Type Auto Hydraulic Type- Filter Press

Model	Filter Plate Size (mm/ 片 )	Filter Area (M² )	Treating Ability (Sludge-cake capacity) (L / Lot )	Ref.Machine size (Hopper Type Not included Base Fame Height) L x W x H (mm)	Ref.Weight (kgs)
TC2 - 47 - 15 - 2	470 x 15	4.9	56	2550 x 890 x 1540	810
TC2 - 47 - 20 - 2	470 x 20	6.7	76	3000 x 890 x 1540	890
TC2 - 47 - 30 - 2	470 x 30	10.2	116	4100 x 890 x 1540	1050
TC2 - 47 - 40 - 3	470 x 40	13.7	156	4420 x 890 x 1480	1150
TC2 - 63 - 15 - 2	630 x 15	9.4	111	2540 x 1190 x 1780	1430
TC2 - 63 - 20 - 2	630 x 20	12.7	150	2990 x 1190 x 1780	1540
TC2 - 63 - 30 - 2	630 x 30	19.4	229	4030 x 1190 x 1780	1790
TC2 - 63 - 40 - 3	630 x 40	26.1	308	4410 x 1190 x 1740	1930
TC2 - 63 - 50 - 4	630 x 50	32.8	387	4910 x 1190 x 1740	2100
TC2 - 80 - 15 - 2	800 x 15	15.0	210	2910 x 1460 x 2200	2440
TC2 - 80 - 20 - 2	800 x 20	20.3	285	3510 x 1460 x 2200	2670
TC2 - 80 - 30 - 2	800 x 30	31.0	435	4710 x 1460 x 2200	3130
TC2 - 80 - 40 - 3	800 x 40	41.7	585	5130 x 1460 x 2110	3410
TC2 - 80 - 50 - 4	800 x 50	52.4	735	5730 x 1460 x 2110	3740
TC2 - 80 - 60 - 5	800 x 60	63.1	885	6250 x 1460 x 2110	4050
TC2 - 100 - 15 - 2	1000 x 15	23.7	339	3010 x 1740 x 2280	3880
TC2 - 100 - 20 - 2	1000 x 20	32.1	460	3570 x 1740 x 2280	4250
TC2 - 100 - 30 - 2	1000 x 30	49.0	702	4770 x 1740 x 2280	4990
TC2 - 100 - 40 - 3	1000 x 40	65.9	944	5190 x 1740 x 2230	5450
TC2 - 100 - 50 - 4	1000 x 50	82.8	1186	5790 x 1740 x 2230	5990
TC2 - 100 - 60 - 5	1000 x 60	99.7	1428	6260 x 1740 x 2230	6490
TC2 - 120 - 20 - 2	1200 x 20	46.0	739	4370 x 2060 x 2620	6270
TC2 - 120 - 30 - 2	1200 x 30	70.2	1128	5920 x 2060 x 2620	7360
TC2 - 120 - 40 - 3	1200 x 40	94.4	1517	6340 x 2060 x 2540	8010
TC2 - 120 - 50 - 4	1200 x 50	118.6	1906	7040 x 2060 x 2540	8750
TC2 - 120 - 60 - 5	1200 x 60	142.8	2295	7670 x 2060 x 2540	9410
TC2 - 120 - 70 - 6	1200 x 70	167.0	2684	8370 x 2060 x 2540	10150
TC2 - 150 - 20 - 2	1500 x 20	74.5	1220	4420 x 2430 x 3280	11360
TC2 - 150 - 30 - 2	1500 x 30	113.7	1862	5920 x 2430 x 3280	13190
TC2 - 150 - 40 - 3	1500 x 40	152.9	2504	6390 x 2430 x 3200	14200
TC2 - 150 - 50 - 4	1500 x 50	192.1	3146	7090 x 2430 x 3200	15400
TC2 - 150 - 60 - 5	1500 x 60	231.3	3788	7660 x 2430 x 3200	16530
TC2 - 150 - 70 - 6	1500 x 70	270.5	4430	8360 x 2430 x 3200	17730

Remark :
1. Available for Hopper Type / Conveyor Type / Auto-Filtrateguard Type.... etc. application choice.
2. We also have the High-pressure ( 16kg /cm ²) Type (Mode l: HTC2- xx ) (Option) For your choice. If need the above Series-Products in detail,
Pls. Contact us directly.
3. Filter plate material : P.P. Engineering Plastics.
4. Our Company will reserve the right of the above design modification and accept customer ' s specific specifications order-made.

Screw Press

Model\ Spec		SY-20	SY-30	SY-40	SY-50	SY -60	SY-80	SY-100	SY-120
Treating Capacity (M³/hr) Inlet Consistency（S.S.5~10％）		2.5~6	3.5~9	5~12	7~15	8~18	12~24	15~30	18～36
Driving Motor Power (HP)		3~7.5	5~10	7.5~15	15~25	20~30	50~75	100～150	150～250
External Dimensions （reference）（mm）	L	3160	3760	4770	5800	6800	9100	10700	12300
	W	1150	1230	1350	1500	1650	1950	2150	2350
	H	1140	1230	1340	1420	1680	2050	2250	2450
Reference Weight（kg）		1330	1700	3000	4600	6200	12700	16500	21100

Remarks：
The treating capacity and water content’s rate will be changed with the physical properties, slurry types and inlet consistence.
The driving motor power will be changed with the physical properties and slurry types and inlet consistence
The above data is for high-fiber, high-ash waste properties.
Yuan Chang reserves the modification right of the above specifications.

Mọi chi tiết xin liên hệ:
Liên hệ: Cty Cổ Phần Công Nghệ Hiển Long
Địa chỉ: B40 Khu Kim Sơn, Nguyễn Hữu Thọ - P Tân Phong – Q.7- TP.HCM – VN
Nhân viên kinh doanh: Trần Trường Lâm
Phone : 0949.171.545

Thông tin

CTY CP CN HIỂN LONG