Introduction
Pump and compressor are widely used in various projects. The vibration and noise caused during operation is harmful to the project quality, usage life of equipment and even the human health. The flexible metal hose is good at decreasing vibration and noise. The project quality and usage life of equipment will be significantly extended if such hoses are installed at inlet and outlet of the pump and compressor. The product can avoid disadvantages of rubber fitting, such as aging and burst caused by material fatigue and failure. This vibration absorption hose is a fine choice for engineering design and application because it can not only reduce the vibration and noise during operation but also compensate misalignment of pipeline.

Structure
This product consists of annular corrugated metal hose, braiding, side connecting short pipe and flange. The hose will absorb vibration of pipeline by its flexibility during operation and the braiding can reinforce hose body against the pressure and thrust and compensate misalignment by changing its angle (≦5mm).
This product is suitable for: DN≦150, PN≦2.5MPa